Table of Contents
Advertisement
Battery life and range
Talk time and stand-by time
When the battery is fully charged, the talk time of your SE630 is approximately 12 hours and the stand-by time
is approximately 150 hours.
Low battery warning
The battery level is shown at the top left of the handset screen. When the battery level becomes low, the low
battery sensor alerts you by sounding an audible tone and blinking the battery icon.
If the battery level becomes exceedingly low, the phone automatically switches off shortly after the alert and
any function in progress will not be saved.
The approximate power levels of your battery are indicated as follows:
Battery is fully charged - 3 bars in the battery icon
Battery is partially charged - 2 bars in the battery icon
Battery is running low - 1 bar in the battery icon
Battery is fully discharged - 0 bar in the battery icon
Out of range warning
The indoor and outdoor range of the phone is up to 50 metres and 300 metres respectively. When the
handset moves beyond operation range, the antenna icon
Configure your SE630
Before you use your SE630, you need to configure it according to the country of use. After charging it for a few
minutes, the WELCOME screen appears. Follow these steps to configure your phone:
1.
Press any key to display the list of countries.
:
2.
Scroll
to your country.
m
3.
Press
to confirm your selection.
SELECT
:
4.
Scroll
to your operator (if necessary).
m
5.
Press
again to confirm your selection.
SELECT
6.
The default line settings and menu language for the selected country will be automatically configured.
You can still make outgoing calls or receive incoming calls without first defining your country
selection.
Depending on your country, the WELCOME screen may not appear. In this case, you are not
required to select your country/operator/language settings.
Install
will blink.
EN
13
Advertisement
Table of Contents
