Table of Contents
Advertisement
EN
Set date and time
m
1.
Press
:
2.
Scroll
to
m
3.
Press
4.
Enter current time (HH:MM) and current date (DD/MM/YY) and press
WARNING If your phone is connected to an ISDN line through an adaptor, the date & time may
be updated after each call. The availability of date & time update is dependent on your network
provider. Please check the date & time settings in your ISDN system or contact your network
provider.
Now, you are ready to use your phone.
Basic operations of your SE630
Make a call
Enter the phone number (maximum 24 digits) and press
For details, please refer to "Make a call" on page 17.
Answer or end a call
r
Press
key to answer a call.
e
Press
key to end a call.
For details, please refer to "Answer a call" and "End a call" on page 18.
Switch the handset on/off
Press and hold
e
Short press
Keypad lock/unlock
Press and hold
Paging
The paging feature enables you to locate a missing handset if the handset is in range and contains
charged batteries.
c
Press
key on the base until the handset starts to ring.
Once retrieved, press
14
.
MENU
Clock & Alarm
and press
Set
Date/Time.
SELECT
to enter
e
key for 5 seconds to switch off the handset in stand-by mode.
key to switch on the handset again.
*
key for 2 seconds to lock and unlock the keypad in stand-by mode.
e
to end the paging.
Install
m
.
SELECT
r
to dial the number.
j
m
.
SELECT
Advertisement
Table of Contents
