Removing the I/O board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at dell.com/
regulatory_compliance.
Prerequisites
1
Remove the
base
2
Remove the battery.
3
Follow the procedure from step 1 to step 3 in "Removing the
4
Remove the
wireless
5
Remove the
coin-cell
Procedure
1
Disconnect the I/O-board cable from the I/O board.
2
Using the pull tab disconnect the power and volume-buttons board cable from
the I/O board.
3
Remove the screw that secures the I/O board to the computer base.
56
computer. After working inside your computer, follow
After working inside your
cover.
card.
battery.
computer. For more safety best
Hard
Before
Drive".