Replacing The Display Hinges; Procedure; Post-Requisites - Dell Inspiron 13 Service Manual

Replacing the display hinges

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at dell.com/
regulatory_compliance.

Procedure

1 Place the display-back cover and antenna assembly on a flat surface.
2 Align the screw holes on the display hinges with the screw holes on the display
back-cover and antenna assembly.
3 Replace the screws that secure the display hinges to the display back-cover and
antenna assembly.
4 Adhere the tapes that secure the display hinges to the display back-cover and
antenna assembly.
5 Route the antenna cables through the routing guide on the hinge cover and
secure it in place.

Post-requisites

1 Follow the procedure from step 4 to step 5 in "Replacing the
2 Replace the display
3 Replace the battery.
4 Replace the base
computer. After working inside your computer, follow
After working inside your
assembly.
cover.
computer. For more safety best
display
Before
panel".
83