Hafele EB SERIES Instruction Manual page 22

OPERATION
C) Appliance operation in selected mode
When the current time reaches the start time,
the appliance will start the selected heating
function. The display will show the Duration
screen. When the programme is started the
icon is extinguished and the
continues to be displayed. Once the Duration
has elapsed, an acoustic signal is sounded
and the display backlight is flashing. The
icon is flashing as well. The maximum
duration of an acoustic signal is 5 minutes.
Touch OK or any place on the screen to
acknowledge and mute the acoustic signal.
Afterwards the appliance will display the inac-
tive Duration screen and the START button
will be displayed.
If you do not start the programme again within
60 seconds, the appliance will display the
current time.
Main Menu \ Settings \ Time \ Timer
Stop the carousel and touch the Timer menu
item to enter the submenu. Another way to
select the Timer menu item is to touch OK
when the carousel has stopped.
This will bring up the Duration screen, as
icon
shown below.
If you do not set or accept Duration within 10
seconds, the Timer screen will be displayed.
Touch the BACK icon
menu.
Touch +/- soft keys or use the slider bar to set
the required Duration. Touch OK to confirm
the Duration setting.
setting screen will close. The Timer setting
screen will be displayed.
Touch OK to start the countdown of the preset
Duration.
down or modify the Duration setting within
60 seconds, the appliance will display the
current time. Touch the BACK icon
the current screen. When the countdown is
started the START button is replaced with the
STOP button. The appliance will show time
countdown and the animated red progress
bar below End Time.
Once the Duration has elapsed, an acoustic
signal is sounded and the display backlight
is flashing. The maximum duration of an
acoustic signal is 5 minutes.
22
to exit the Timer
T h e D u r a t i o n
If you do not start the count-
to exit