Hafele EB SERIES Instruction Manual page 51

CLEANING AND MAINTENANCE
 Ovens marked with the letter D are
equipped with easily removable wire shelf
supports. To remove them for cleaning
use size 3 Allen key to undo the Z1 and Z2
fixing screws from shelf support holders
Once cleaned, replace the shelf supports
in oven chamber. Before tightening, make
sure the shelf support holders are secure
in the holes provided in oven chamber
wall.
Removing wire shelf supports
Z2
Z1
 Ovens marked with the letters Dc have
stainless steel sliding telescopic runners
attached to the wire shelf supports. The
telescopic runners should be removed
and cleaned together with the wire shelf
supports. Before you put the baking tray
on them, they should be pulled out (if the
oven is hot, pull out the telescopic runners
by hooking the rear edge of the baking
tray at the front of the telescopic runners)
and then slide along with the tray.
Important!
Do not wash telescopic runners in a
dishwasher.
Removing telescopic runners
Installing telescopic runners
51