Hafele EB SERIES Instruction Manual page 21

OPERATION
bar. The appliance will show time countdown
and the animated red progress bar below
End Time.
Once the Duration has elapsed, an acous-
tic signal is sounded (2 beeps / pause / 2
beeps) and the display backlight is flashing.
The acoustic signal is repeated every 3 sec-
onds. The icon is flashing as well. The
maximum duration of an acoustic signal is
5 minutes.
Touch OK or any place on the screen to
acknowledge and mute the acoustic signal.
Afterwards the appliance will display the
inactive Duration screen. If you do not start
the programme again within 60 seconds, the
appliance will display the current time.
Set Duration and End Time (for a heating
function)
A) Set the Duration.
For more details on how to Set the Duration,
please refer to the Set the Duration (for the
heating function) section.
B) Set the End Time.
To set the End Time, Duration must be set on
the Duration setting screen. The
will be displayed.
Touch to edit End Time. The
will flash. If the user takes no action within
10 seconds, the selected heating function
screen will be displayed with the previously
set Duration
Touch again while
will now be able to set End Time. The
symbol stops flashing and the
starts to flash. If the user takes no action
within 10 seconds, the selected heating
function screen will be displayed with the
previously set Duration
Touch +/- soft keys or use the slider bar to set
the required End Time. Touch OK to confirm
the End Time setting.
setting screen will close. The Timer setting
screen will be displayed. The
symbols will be shown on the notification bar.
The time remaining to start is shown on the
animated progress bar.
This is shown on the on the animated pro-
gress bar below the time.
If the user takes no action within 60 seconds,
the appliance will display the current time (the
settings are retained). On the current time
screen, the End Time
icons are shown on the notification bar. Both
icons flash until the oven programme is start-
ed. When you touch the screen anywhere the
appliance will display the last edited settings.
21
symbol
symbol
is still flashing. You
symbol
The End Time
and
and Duration