Step 2 - Install Anti-Tip Bracket - Haier HCR2250AES Installation Instructions Manual

STEP 2 - INSTALL ANTI-TIP BRACKET

A child or adult can tip the range and be killed.
Connect anti-tip bracket to rear range foot.
Reconnect the anti-tip bracket, if the range is moved.
Failure to follow these instructions can result in death or serious burns
to children and adults.
IMPORTANT:
•
An anti-tip bracket kit is included with the range. Follow the instructions
supplied with the anti-tip bracket.
•
Do not completely remove the rear leveling leg. The anti-tip bracket uses a rear
leveling leg to secure the range to the floor.
•
The anti-tip bracket should be installed, so that it secures either the right or left
rear leveling leg.
•
After installing the leveling leg, note the distance from the side of the range to
the center of the leveling leg. Mark this location on the floor.
•
Attach the anti-tip bracket to the floor with 2 screws so that the rear leveling leg
will be centered within the bracket once it is in its final position.
NOTE: Contact a qualified floor covering installer for the best procedure for drilling
mounting holes through your type of floor covering.
WARNING
Tip Over Hazard
9