Haier HCR2250AES Installation Instructions Manual page 21

4-WIRE CONNECTION (UNGROUNDED NEUTRAL)
Connect to the House Electrical Supply - U.S.A. Only
IMPORTANT: Use the 4-wire cable from home power supply in the U.S. where local
codes do not allow grounding through neutral, new branch circuit installations (1996
NEC), mobile homes and recreational vehicles, new construction and in Canada.
1. Disconnect power.
a
Junction Box
b
Black Wires
c
Red Wires
d
Cable from Oven
2. Connect the 2 black wires
3. Connect the 2 red wires
4. Connect the 2 neutral (white) wires
5. Connect the ground (green or bare) wire
(green or bare) wire (in the junction box) using a UL listed wire connector.
6. Install junction box cover.
Ungrounded Neutral
a
b
c
d
e
UL listed or CSA
Approved Conduit
Connector
f
Ground (Green or
Bare) Wires
together using a UL listed wire connector.
b
together using a UL listed wire connector.
c
h
i
h
g
f
e
g
UL Listed Wire
Connector
h
Neutral (White) Wires
i
House Electrical Supply
together using a UL listed wire connector.
from the oven cable to the ground
f
19