Settings To A Quick Recall Key (Quick Memory Feature); Setting The Preferred Operating Mode - Yaesu FT-65R Operating Manual

Storing the displayed Frequency and Settings to a
Quick Recall Key (Quick Memory feature)
1. While operating in the VFO mode or the Memory mode, set the desired
frequency and associated settings.
2. Press and hold the [P1], [P2], [P3] or [P4] key to store the frequency to a
Quick Recall key.
3. Press the [P1], [P2], [P3] or [P4] key to recall the stored settings.

Setting the Preferred Operating Mode

The following reset or preferred operating modes may be selected.
Display
F1:SET RESET
F2:MEM RESET
F3:BANK RESET
F4:ALL RESET
F5:MEM-ONLY
F6:VHF-ONLY
F7:UHF-ONLY
F8:DUAL DISP
F9:CLONE
1. Turn the transceiver OFF.
2. Press and hold the MONI/T.CALL key and the PTT switch simultaneously,
while turning the radio ON.
3. When the LCD backlight comes on, release the MONI/T.CALL key and
PTT switch.
4. Referring to the above table, press the [▲] or
[▼] key to select the desired operating mode.
5. Press the F key momentarily to activate the selected operating mode.
FT-65R/FT-65E Operating Manual
A Quick recall key may also store the frequency and asso-
ciated settings in the Memory Mode.
Reset the Set Mode settings to factory defaults.
Clear the Memory settings to factory defaults.
Clear the Memory Bank assignments.
Clear the All memories and other settings to factory
defaults.
Operation on the Memory mode only.
Operation on the VHF Band only.
Operation on the UHF Band only.
Display both VFO-A and VFO-B.
Clone mode.
Basic Operation
Description
23