Memory Storage - Yaesu FT-65R Operating Manual

Memory Mode

Memory Storage

1. Select the desired frequency, while operating in the VFO mode.
Be sure to set up any desired CTCSS or DCS tones, as well as any de-
sired repeater offset. The power level may also be set at this time, if you
wish to store it.
2. Press and hold the [ V/M] key.
A blank memory channel will be displayed automatically.
3. If it is desired to change to another channel number, press the [▲] or [▼]
key.
4. Press the Alphabet / Numeric keys to input
characters and create a "Tag" (label) for the
memory channel.
If not inputting a "Tag" (label), proceed to step 5.
5. Press and hold the [ V/M] key to store the frequency and settings into the
selected memory channel.
"MEM-IN" on the display will blink twice and the tone will sound to com-
plete the memory setting.
30
• To move the cursor to the next character, press the F key.
• To correct a mistake, press the F key repeatedly until the
cursor returns to the character position.
For more details on the character/symbol, see page 38.
FT-65R/FT-65E Operating Manual