Display Symbols - Veridian Healthcare 01-5041 Instruction Manual

DISPLAY SYMBOLS

Symbol Meaning
Systolic Blood Pressure—The 'top' blood pressure result
Diastolic Blood Pressure—The 'bottom' blood pressure result
Milligrams of Mercury—Unit of blood pressure measurement for this device
Pulse Rate—Pulse rate per minute during the measurement
Low Battery—Battery is low and should be replaced
Down Arrow—The cuff is not properly wrapped or has too much air left in it;
arrow will cease flashing when the unit is ready for measurement
Up Arrow—A measurement error has occurred and the measurement should be
attempted again
Irregular Heartbeat Icon—An irregular heartbeat was detected during the
measurement
Memory Reading—Reading on display is a reading from a memory bank
Average—The display shows the average of the last three measurements in
memory
Error– An error has occurred during the measurement
2
– ENGLISH