Display Symbols; Troubleshooting - Veridian Healthcare 01-5021 Instruction Manual

DISPLAY SYMBOLS

Symbol
Low battery
Pulse rate per minute
An error has occured during measure-
ment
Reading on display is a reading from a
memory bank

TROUBLESHOOTING

Problem
Display shows an
abnormal result
Display is blank when
power is on
1 1 6 6 • • E E N N G G L L I I S S H H
Meaning
Possible Cause
Cuff position was not correct or was
not tight enough
Body posture was not correct during
measurement
Speaking, excessive movement, anger,
excited or nervous anxiety during
measurement
Batteries may be expired or installed
improperly
Symbol
An irregular heartbeat was detected
during measurement
The cuff is not properly wrapped or has
too much air left in it. The arrow will
cease flashing when the unit is ready for
measurement
A measurement error has occured and
the measurement should be attempted
again.
Solution
Apply the cuff properly and attempt a
new measurement
Review the 'Taking a Measurement'
portion of this manual and attempt a
new measurement
Wait a period of time and attempt a
new measurement after calm has
returned; do not speak or move during
measurement
Check the polarity of the batteries and
reinstall if necessary; replace batteries
with new batteries
Meaning