Description Of Device & Label Symbols - Veridian Healthcare 01-5041 Instruction Manual

CARE & MAINTENANCE
• To disinfect the cuff, wipe the inside (skin contact side) of the cuff lightly moistened with 70-
90% ethyl rubbing alcohol and allow to air dry; it is suggested to disinfect the cuff frequently
when used in clinical settings or if the cuff is contaminated in any way
• Never attempt to iron or dry the cuff; if the cuff becomes wet, allow the cuff to air dry
completely before use or storage
• With proper care, the cuff will maintain performance for a minimum of 1000 measurements
DEVICE & LABEL SYMBOLS
Symbol Meaning
Read This Manual—All included manuals should be read prior to first use
Warning—Symbol indicates a warning, prohibition or mandatory action that mitigates a
risk that is not necessarily obvious to the device operator
Typ e BF Applied Parts—Indicates that a part of this unit comes in contact with the patient
in order to carry out it's intended function; in the case of this device the cuff is the Type BF
Applied Part
Environment Protection—dispose of this product properly; consult with your local recycling
ordinances for proper recycling and disposal
Keep Dry—This device should be kept dry; never submerge the unit or cuff. Consult with
the Care and Maintenance section of this manual for information on cleaning your monitor
Polarity Symbol—Polarity of D.C. power connector; note connector may not be included
with this device but is available for purchase with the included form
19
ENGLISH –