Memory Function; Recalling Measurements In Memory - Veridian Healthcare 01-5041 Instruction Manual

MEMORY FUNCTION RECALL

Recalling Measurements in Memory

You can recall up to 60 total measurements in memory. These
measurements can be shared with your physician or trained
healthcare professional.
1. Press and release the M (MEMORY) button. The unit will show
how many measurements are stored within the bank, Fig 1.
2. Press the M (MEMORY) button again to scroll through the saved
measurements. Measurements will appear on the display from
oldest to most current. All results for a given measurement will
display, including measurement results, pulse rate, Hypertension
Indicator icon and Irregular Heartbeat alert (if applicable), Fig 2.
After you've scrolled through all the readings, the unit will
automatically turn off.
3. When the number of readings exceeds 60, the oldest data will
be replaced with the new record.
Clearing Measurements from Memory
1. Press and release the M (MEMORY) button. The unit will display
how many measurements are stored within the bank.
2. Press and hold down the M (MEMORY) button until two
horizontal lines flash, Fig. 3. This indicates that all
measurements have been erased.
REMINDER:When using an AC adapter, it isrecommended that batteries are
also installed in order to preserve the date and time settings when the
monitor is not plugged in to a power source.
Fig. 1
Fig. 2
Fig. 3
17
ENGLISH –