Setting Date And Time - Veridian Healthcare 01-5041 Instruction Manual

SETTING DATE/TIME
IT IS NECESSARY TO SET THE DATE AND TIME FOR THE MONITOR EVERY TIME
BATTERIES ARE INITIALLY INSTALLED OR REPLACED.
and time will default to factory settings, 12:00 a.m. 1M 1D, if you do not choose to set the
correct information.
1. When the unit is off, press and release both the
M (MEMORY) button at the same time. The month will begin to flash,
Fig 1.
2. Press the M (MEMORY) button to change until the desired number
appears. To scroll through the numbers quicker, hold down the M
(MEMORY) button as the numbers advance.
3. Press the POWER button to confirm the month entry.
4. Next, the date will blink. Repeat steps 2 and 3 to set the date, then
hours, then minutes. This unit does not track the year.
5. After setting the minutes, the unit will automatically exit out of the date/time setting mode.
When the monitor is off, the date and time will still appear at the top of the screen.
T ime is displayed in 24hr Military Time. This chart explains the time conversion.
MILITARY TIME = REGULAR TIME
1:00 = 1am
2:00 = 2am
3:00 = 3am
4:00 = 4am
5:00 = 5am
6:00 = 6am
1
– ENGLISH
7:00 = 7am
8:00 = 8am
9:00 = 9am
10:00 = 10am
11:00 = 11am
12:00 = 12pm
POWER and
13:00 = 1pm
14:00 = 2pm
15:00 = 3pm
16:00 = 4pm
17:00 = 5pm
18:00 = 6pm
19:00 = 7pm
20:00 = 8pm
21:00 = 9pm
22:00 = 10pm
23:00 = 11pm
24:00 = 12am
Fig. 1