Startup - Beem Pyramid A4 User Manual

EN
Ensure that the mains cable is
■
undamaged and is not laid over
sharp edges.
The mains cable must not be
■
pulled tightly, bent or come into
contact with hot surfaces.
Route the mains cable to prevent
■
risk of tripping.
Always unwind the mains lead
■
completely before connecting the
appliance to the plug socket.
The electrical safety of the appli-
■
ance is only assured when it is
connected to a properly installed
protective earth (PE) conductor
system. Connection to a mains
socket without PE conductor is
forbidden. If in doubt, the electri-
cal system must be checked by a
qualified electrician. The manufac-
turer assumes no liability for injury
or damage caused by a missing or
interrupted protective earth con-
ductor.
Symbols used
DANGER
This indicates an imminent hazardous
situation, which could lead to severe
physical injury or death.
► Follow these instructions to avoid
danger.
BEEM - Elements of Lifestyle
WARNING
This indicates a possible hazardous
situation, which could lead to severe
physical injury or death.
► Follow these instructions to avoid
danger.
ATTENTION
This indicates a potentially hazardous
situation, which could lead to minor
injuries or material damage.
► Follow these instructions to avoid
danger.
NOTE
► A note contains additional informa-
tion to simplify the use of the appli-
ance.

Startup

Unpacking
Remove the appliance, all accessory
‹
parts and the user manual from the
box.
Remove all packaging materials and
‹
protective foils from the product and
the accessories before using it for the
first time.
NOTE
► Never remove the rating plate or any
warning signs on the appliance..
Pyramid A4
19