Startup - Beem Schneid-FiXX User Manual

EN
Electrical connection
For safe and trouble-free operation of the
appliance, the following instructions on the
electrical connection must be be observed:
■ Before connecting the appliance, com-
pare the connection data (voltage and
frequency) on the rating plate with those
of your mains power supply. The data
must correspond in order to avoid dam-
age to the appliance. If in doubt, ask
your electrical appliance retailer.
■ The mains socket must be protected by
at least a 10 A automatic circuit breaker.
■ Ensure that the mains cable is undam-
aged and is not laid over hot surfaces or
sharp edges.
■ The connecting cable must not be
strained or bent.
■ Always unwind the mains cable com-
pletely before connecting the appliance
to the mains socket.
■ The electrical safety of the appliance
is only assured when it is connected
to a properly installed protective earth
(PE) conductor system. Connection to
a mains socket without PE conductor
is forbidden. If in doubt, the electrical
system must be checked by a qualified
electrician. The manufacturer assumes
no liability for injury or damage caused
by a missing or interrupted protective
earth conductor.
BEEM - Elements of Lifestyle

Startup

Unpacking
Remove the appliance, all accessory
‹
parts and the user manual from the
box.
Remove all packaging materials and
‹
protective foils from the product and
the accessories before using it for the
first time.
NOTE
► Do not remove the rating plate or any
warning signs on the appliance.
► If possible, keep the original packag-
ing during the warranty and guarantee
period in order to be able to pack the
appliance properly in the event of
a guarantee claim. Transport dam-
age will invalidate the warranty and
guarantee.
Checking the delivery contents
Check for visible signs of damage or miss-
ing items.
Report incomplete or damaged contents to
your supplier immediately.
Prior to first use
Clean the appliance and the accessories as
described in the Cleaning and care sec-
tion.
Schneid-FiXX
18