How To Test Blood Glucose - Invacare trackease smart system User Manual

How to Test Blood Glucose

1. Check dates on Test Strip vial being used. Do
not use if 120 days past written date or date
next to
2. Wash area. Rinse well and dry thoroughly.
3. Remove Test Strip from vial. Recap vial
immediately.
Note: Use Test Strips quickly after removal from
vial. Strips that have been left out of vial
too long will give error message when used.
Discard old Strip and use new Strip for
testing.
4. With Meter off, insert Test
Strip Contact End (Contacts
facing up) into Test Port.
Meter turns on.
5. Match Code in Display to
Code on Test Strip vial being
used. If Codes do not match,
see Coding.
Note: Letter printed before the number on Code
Chip and vial label code will not appear in
Meter Display
6. Lance fingertip or forearm. Allow drop to
form.
symbol, whichever comes first
18
Contacts
Face
Up