Coding - Invacare trackease smart system User Manual

Coding

Code Chip is packaged with each box of Test Strips.
Note: After all Test Strips are used from box,
remove Code Chip from Meter and discard.
Open new box of Test Strips and insert new
Code Chip into Meter before testing.
1. Start with Meter off. Remove and
open Code Chip package from box
of Test Strips to be used. Match
Code printed on Code Chip to Code
printed on vial label.
Caution! If Codes do not match, do not use
Test Strips. Call for assistance.
2. If Codes match, insert
Code Chip into Code
Chip Port as shown,
locking in place.
9