Adding Control Pad; All The Rest; Resetting Control Pad; Adding Products - Velux INTEGRA KLR 200 Quick Manual

Adding products

Adding control pad

5
A
B
6
B
18 VELUX ®
Tap in control pad followed
A
by in control pad .
B
If the display shows "No products
found", tap "Search again" to try
again.
Tap "OK" in control pad .
B
English

All the rest

Resetting control pad

If you want to delete all registered products and personal settings and
start afresh, you can reset the control pad to the initial factory settings.
Note: If you have one control pad only, all the products must be reset
before they can be registered in the control pad again (see the section
If initial set-up fails). If you have a second control pad, you can copy this
to the control pad you are resetting instead (see the section Adding
control pad).
1
2
3
1
2
English
Remove the battery compartment
lid by pressing the release button
with a screwdriver as illustrated
2 .
1 ,
Press the RESET button on the
back of the control pad with
a pointed object for at least
5 seconds .
3
Replace lid.
In the display screen, tap "Yes" to
conirm that you want to reset the
control pad.
The control pad has now been
reset. To use the control pad again,
see the section Initial set-up.
VELUX ® 19