Inspection Schedule For Undercarriage Eu - Atlas Copco XRYS 577 Instruction Manual

INSPECTION SCHEDULE FOR UNDERCARRIAGE EU

Inspection includes regular checks of individual
components and related action based on these checks.
Lubricating individual components is also part of
regular inspections. Inspection intervals depend on
usage. Defective parts have to be replaced by original
parts.
Inspection jobs
Check whether wheel nuts are still tight
Check and if necessary tighten any fixation nuts
Check tyre pressure and wear and tear
1)
Inspect brake system
Check brake adjustment i.e. adjust
2)
Inspect electrics
Check line filters
Check coupling heads
Lubricate tow bar
Grease nipples
Check towing eye for wear and tear
Check frame for cracks and damage
In principle damaged parts have to be repaired or
replaced.
Any other inspection jobs have to be carried out
regularly by an expert at 6 month intervals.
After 50,000 km i.e. after 12 months of running, the
undercarriage of the compressor has to be inspected
on its operational reliability by an expert.
A check of the vehicle's traffic safety is considered to
have been completed when an expert's report
declaring it free from defects has been submitted in
accordance with the laws of the country involved.
After the first
50 km
1)
Inspection list for the expert:
• Brake system
• Wheel bearing
• Axle
500 km or first
loaded trip
x x
x
x
x
• Tyres
• Electrical installations
• Towing eye
- 83 -
The following details refer to normal use of the
compressor based on a maximum of 50,000 km per
year. Related instructions can be found in the
following subsections.
every
5,000 km 5,000 km
(fortnightly)
x x
x x
x x
x x
x x
x
x
x x
1)
To be performed by skill level 2 Mechanical
technician
2)
To be performed by skill level 3 Electrical
technician
10,000 km
monthly
x
x
x
x