Pl 2.10 User Interface - Xerox WorkCentre 5945 Service Manual

PL 2.10 User Interface

Item Part Description
1 – UI assembly (USSG/XCL) (REP
2.1)
– – UI assembly (XE) (REP 2.1)
2 – UI screen clamp (P/O PL 2.10 Item
1)
3 – SBC PWB to UI Control PWB
power/comms harness (Not
Spared)
4 123K08651 UI touch screen (REP 2.2)
5 848K94781 UI housing (USSG/XCL)
– 848K94771 UI housing (XE)
6 960K79683 UI Control PWB (REP 2.3)
7 960K92940 UI Status PWB
8 952K26981 Control to status PWB ribbon cable
9 960K79691 UI Keyboard PWB
10 952K26990 Control to keyboard PWB ribbon
cable
11 822E21181 USB socket cover
12 – Left frame cover (REF: PL 28.10
Item 6)
13 – SBC PWB to UI USB port harness
(Not Spared)
14 – SBC PWB to UI Control PWB data
cable (Not Spared)
15 – Clamp (Not Spared)
16 – UI support (Not Spared)
17 – Lower cover (Not Spared)
18 – Left overlay label (P/O PL 2.10 Item
21)
19 – Middle overlay label (P/O PL 2.10
Item 21)
20 – Right overlay label (P/O PL 2.10
Item 21)
21 – Overlay label kit (REF: PL 31.12
Item 7)
22 – Left frame cover support (Not
Spared)
23 144K00660 RFID Card reader (NOTE)
24 952K51010 USB MFF harness (Not shown)
(NOTE)
NOTE: Also part of kit , PL 31.14 Item 16.
Parts Lists
PL 2.10
February 2016
5-6 Xerox® WorkCentre® 5945 Family