Table of Contents
Advertisement
Chapter 6. Using the projector
Projector operating system
The projector has a preinstalled Android 6.0 operating system, which provides various functions through a
Home menu and a Settings menu.
Use either of the following methods to enter the menus:
•
Projector touch pad: Tap
Settings menu.
•
Assistant app: Select
Settings menu.
Settings menu
The following table shows how to enable some frequently used functions from the Settings menu.
Function
Wi-Fi
Hotspot
Bluetooth
Keystone Correction
For detailed instructions, refer to the later part of this chapter.
Note: The actions above are for reference only and might be performed differently from your product.
Using the projector touch pad
The touch pad surface is sensitive to finger touch and movement. You can use the touch pad to perform
the same point and select actions as a traditional mouse. You also can use the touch pad to perform the
following touch gestures:
Touch: Tap.
Function: Click an item.
to enter the Home menu. Select
to enter the Home menu. Select
Action
Find Wi-Fi and turn it on. Then select a network to connect to it.
Find Hotspot and turn it on.
Find Bluetooth and turn it on. Then select an available device to connect to it.
Find Keystone Correction. Then turn on the auto correction or set a manual
correction value.
from the Home menu to enter the
from the Home menu to enter the
Touch: Tap and hold with
two fingers.
Function: Display a shortcut
menu when applicable.
6
Advertisement
Table of Contents
