Maintenance - Brother QL-1050N User Manual

2 Maintenance

Maintenance of the machine may be carried out as required. However, some environments
require that maintenance must be done more frequently (e.g. in dusty conditions).
Print head maintenance
The DK Roll (thermal printing paper type) used
with the machine is designed to clean the print
head automatically. When the DK Roll passes
the print head during printing and label feeding,
the print head is cleaned. If the print head is
not cleaned thoroughly use a cotton swab and
wipe the head.
Roller maintenance
Cut the DK label and remove the backing
paper of the label. Then, put the adhesive side
of the label against the roller and remove the
dirt.
Label outlet maintenance
If glue accumulates on the label outlet and the
machine becomes jammed, disconnect the
power plug from the machine and clean the
label outlet with a cloth dipped in isopropyl
alcohol.
Print head
Label outlet
17
STEP
1
Roller
STEP
2
STEP
3