iBall Slide nimble 4GF User Manual page 38

Select mock location app : Select mock location and service information to be sent to a location
manager service for testing.
Inspect views' attributes in Android System Manager.
Enable view attribute inspection :
Select debug app : set application for debugging.
Wait for debugger : Debugged application waits for debugger to attach before executing.
Verify apps over USB : Check apps installed via ADB/ADT for harmful behaviour.
Logger buffer sizes : select Logger sizes per log buffer.
Wireless display certification : Show options for wireless display certification
Enable Wi-fi Verbose Logging : Increase Wi-Fi logging level, show per SSID RSSI in Wi-Fi
Picker
Aggressive Wi-Fi to Cellular handover : When enabled, Wi-Fi will be more aggressive in
handling over the data connection to cellular, when Wi-Fi signal is low
Always allow Wi-Fi Roam Scans : Allow/ Disallow Wi-Fi Roam Scans based on the amount of
data traffic present at the interface
Use legacy DHCP client : Use the DHCP client from Lollipop instead of the new Android DHCP
client.
Cellular data always active : Always keep mobile data active, even when Wi-Fi is active (for fast
network switching).
Select USB Configuration : MTP (Media Transfer Protocol).
Show touches : Set to show visual feedback for touches.
Pointer Location : Set the Co-ordinates & traces of the pointer when you touch the screen.
Show surface updates : Flash entire window surfaces when they update.
Show layout bounds : Show clip, bounds, margins etc.
Force RTL layout direction : Force screen layout direction to RTL for all locales.
Window animation scale : The ratio by which the animation scale is applied.
Transition Animation Scale : To speed up transitions (and your slide's reaction time), either
turn off animations, or reduce the scale.
Animator duration scale : The ratio in which the animation scale is measured.
Simulate secondary displays : Select one option out of the provided four.
Force GPU rendering : Force use of GPU for 2d drawing.
Show GPU view updates : Flash views inside window when drawn with the GPU.
Show hardware layers update : Flash hardware layers green when they update.
Debug GPU overdraw : with options OFF, Show overdraw areas and Show arears for
Deuteranomaly.
Debug non-rectangular clip operations : with options OFF, Draw non-rectangular clip region in
blue and Highlight commands in green.
37