iBall Slide nimble 4GF User Manual page 17

2. Under "Wireless & networks," click Wi-Fi.
3. Make sure the Wi-Fi is switched On. Click the Menu icon
screen. Then, click Add network.
4. Enter the network name (SSID) and other security details, if needed.
5. Click Save.
6. Once connected, your device will say "Connected" under the network name.
Your device will connect to this network automatically the next time you are in range.
Remove a Wi-Fi network
You can forget a saved Wi-Fi network if you don't want your device to connect to it automatically.
To remove a Wi-Fi network from your device, follow these steps:
1. Open your device's Settings app
2. Under "Wireless & networks," click Wi-Fi.
3. Make sure the Wi-Fi is switched On.
4. In the Wi-Fi settings screen, click the name of a saved network. If you don't see the
network in the list, click the Menu icon
network.
5. Click Forget.
View Wi-Fi network details and change network settings
You can view your saved Wi-Fi networks' details and change network settings by following these
steps:
1. Open your device's Settings app
2. Under "Wireless & networks," click Wi-Fi.
3. Connect to the network you want to view details for.
4. Click the network name. You can see information about:

Connection status

Signal strength

Link speed

Frequency
5. To change network settings, touch and hold the network name. You can choose to:

Forget the network

Modify the network
.
, then click Saved networks and click the
.
16
in the top right corner of the