iBall Slide nimble 4GF User Manual page 11

All the functions have been explained in details in their respective sections.
Note: On pressing on some text of these options you will be directed into settings option from
there you can operate further if you want to use more related functions.
Installing the SIM card and Storage card
You need to open the SIM cover, which is provided back side of the device before you can install
the SIM card and storage card. Also, make sure to always turn off the power before installing or
replacing the SIM card and storage card.
To remove the SIM cover
1. Make sure your device is turned off.
2. Firmly hold the device with both hands and the front panel facing down.
3. Pull cover from the knotch located on the SIM cover.
To install the SIM card
The SIM card contains your phone number, service details, and phonebook/ message memory.
Your device supports both 4G, 3G & 2G SIM cards.
1. Pull cover from the lower back side.
2. Locate the SIM card slot, and then insert the SIM card with its gold contacts facing down and
its cut-off corner facing out the card slot for SIM 1 & cut-off corner facing in for SIM 2
3. Push the SIM card completely into the slot.
Note:
• The Slide supports dual SIM cards, SIM 1 slot for Normal SIM & SIM 2 slot for Micro SIM. SIM
1 & SIM 2 both supports 4G networks but at a time one SIM slot will work as a 4G SIM slot.
• Some legacy SIM cards may not function with your device. You should consult with your
service provider for a replacement of SIM card. There may be some fees for this service.
To install the Memory card
To have additional storage for your images, videos, music, and files, you can purchase a memory
card and install it into your device.
1. Make sure that your device is turned OFF, and then pull the SIM cover.
2. Locate the memory card slot on the upper part of the exposed right panel.
3. Insert the memory card into the slot with its gold contacts facing down until it clicks into
place.
Note: To remove the memory card, push outside & eject it from the slot.
Charging the Battery
New batteries are shipped partially charged. Before you start using your device, it is
recommended that you charge the battery. Some batteries perform best after several full
charge/discharge cycles.
10