Troubleshooting - XP Metal Detectors Deus V4 User Manual

Hide thumbs Also See for Deus V4:

Manual (2 pages)

Table Of Contents

Table of Contents

You become aware of abnormal performance, instability, false signals, interference, for no apparent reason

Sensitivity is too high.

You are in a zone with a lot of interference

(high-voltage power lines, electric transformer, electric fence).

There is a storm nearby and the electromagnetic

discharges of lightning are interfering with the detector.

You are close to other working metal detectors.

The ground balance is set too low. Reset it

The ground is heavily infested with iron and other metals.

The coil does not switch on, unlike the remote control and the headphones

You have a different coil selected in the menu :

OPTION / COIL ON the remote control or in the menu

COIL on the headphones.

The serial number of the coil that you had entered in

the remote control was incorrect or was changed

inadvertently.

The coil battery is discharged

The coil is defective.

There is no detection sound in the headphones despite them being switched on (and pressing the buttons generates an audible beep)

Check that you do not have a different coil selected

in the COIL menu (pg 26). (headphone)

The headphones have not yet been paired with the

coil.

The coil's serial number was changed inadvertently

in the headphones and the headphones are no

longer paired with the coil.

There is no sound in the headphones when passing over a target and pressing the buttons generates no audible beep

The backphone is faulty.

The earpiece is faulty, for example its keypad was poorly

reconnected to the circuit after being removed, or the

audio contacts are faulty or dirty.