Indesit IHT6.5CMIX Service Information page 22

Whirlpool UK Appliances Ltd
9. Using a small flatbladed screwdriver, carefully release at the top first and then completely remove
the controls / motor cable cover, Fig. 11.
10. Disconnect the cable to the motor, Fig. 12, by squeezing the tabs and pulling out the plug.
11. While supporting the motor, remove the four screws (red circles) that secure the motor in order to
extract the cable fully out of the slot, Fig. 13. Remove the two screws securing the power supply
cable (yellow circle), Fig. 13.
12. Reassemble in reverse order.
E) Motor
1. Remove the grease filters as in (A).
2. While supporting the motor, remove the four screws that secure the motor, Fig. 13.
3. Using a small flatbladed screwdriver, carefully release at the top first and then completely remove
the controls / motor cable cover, Fig. 11.
4. Disconnect the cable to the motor by squeezing the tabs and pulling out the plug, Fig. 12.
Service Manual UK
Fig. 11
22 of 25
Fig. 13
continued...
Fig. 12
English