Whirlpool UK Appliances Ltd
3.
Disconnect the wiring to the lamp assembly to be replaced, also remove the cable tie, Fig. 2.
4.
Squeeze the tabs either side and push the lamp assembly out, Fig. 3.
5.
Connect the wiring to the new lamp assembly and reassemble in reverse order.
C) Halogen Lamp Replacement
Caution! Make sure the bulbs are cool before touching them and avoid touching them with bare
hands.
1.
Remove the glass cover and frame using a small screwdriver or similar tool, Figs. 4 & 5.
2.
Replace the bulb with same type G9, 25 Watts.
Note: Do not touch the lamp with bare hands.
Service Manual UK
Fig. 2
Fig. 3
Fig. 4
Fig. 5
20 of 25
English