Adjust Peakposi (Corner) - Panasonic TY-TP58P10S Service Manual

11. Press "Initialize".
• Both red and blue wave shapes match with each other. The
red wave shape is set during start-up and initialization with
basic light level. The blue wave shape shows the operation
in progress.
• Adjustment from here can be made with this wave shape
condition.
6.6.

Adjust PEAKPOSI (Corner)

• Purpose for adjustment : Make Touch Panel recognize the
corners bottom left and right.
1. Display Parameter and select "Camera Scope" tab.
2. Touch the corner bottom right of PDP screen display
area.
• Touch with a bar such as Touch Pen to indicate the
correct position. The blue wave shape at the corner
bottom right falls down.
• If lpeakpos value is changed, the yellow line in the
reflection plate image moves to left and right. Adjust
lpeakpos and match the position to the dent of the blue
wave shape.
• As the reflection plate looks black at the touched point,
matching yellow line is better to adjust correctly.
3. Touch the corner bottom left of PDP screen display area.
• Touch with a bar such as Touch Pen to indicate the
correct position. The blue wave shape at the corner
bottom left falls down.
• If rpeakpos value is changed, the yellow line in the
reflection plate image moves to left and right. Adjust
rpeakpos and match the position to the dent of the blue
wave shape.
• As the reflection plate looks black at the touched point,
matching yellow line is better to adjust correctly.
4. Press "Write to ROM" to write the adjustment result.
45