Touch Operation; Button Operation - Panasonic LUMIX DC-FZ80 Owner's Manual

Setting up [Pull Focus]
Set the frames that specify the positions where the [Pull
Focus] starts (first position) and stops (second position).

Touch operation

Touch a subject (first position), drag your finger to the desired location (second position),
and release the finger.
• To cancel the frame settings, touch [

Button operation

Press
Press
• If you press [DISP.] button before pressing [MENU/SET], the frame will return to the center.
Repeat step
• To cancel the frame settings, press [MENU/SET].
●
A greater effect can be achieved by creating a striking contrast of focus between the start
and end positions, for example by shifting focus from the background to foreground, or vice
versa.
●
After setting focus, try to keep the distance between the subject and the camera constant.
●
When the camera fails to set the frame, it returns to the first position.
●
When [Pull Focus] is set to [ON]
• Auto Focus Mode will be switched to [
• If you take a picture, the Auto Focus operation [
●
Even when [Metering Mode]
with focus. The target is fixed at the start position (first position) of [Pull Focus].
●
This function is not available in the following cases:
• In Manual Focus
• When using the Digital Zoom
162
].
to move the frame, and press [MENU/SET] (First position)
(Second position)
(→177) is set to [
], a setting specially designed for [Pull Focus].
] will take place at the first frame position.
] (Spot), the spot metering target does not move
Recording motion pictures
Recording Snap Movies
DVQP1223