Panasonic LUMIX DC-FZ80 Owner's Manual page 177

About RAW file
In RAW file format the data is saved without any picture processing by the camera. To play back and
edit RAW file pictures, you must use this unit or dedicated software.
• You can develop the RAW file pictures using [RAW Processing] in the [Playback] menu.
• To develop and edit RAW file pictures on a PC, use the software (Ichikawa Soft Laboratory's
"SILKYPIX Developer Studio"). To get this software, download it from the supplier's website and
install it on your PC.
●
A RAW still picture is always recorded at [4:3] (4896×3672).
●
If you delete a picture recorded in [
JPEG pictures are also deleted.
●
When you play back a picture recorded with [
aspect ratio of the picture during recording.
●
The setting is fixed to [
●
You cannot set to [
• Panorama Shot Mode
• [Handheld Night Shot] (Scene Guide Mode)
[Metering Mode]
Recording mode:
You can change the metering method used for measuring brightness.
→ [Rec] → [Metering Mode]
[Metering Mode]
(Multiple)
(Center weighted)
(Spot)
●
If you set the spot metering target on the edge of the screen, the metering may be affected by the
brightness around the location.
177
(→274)
] or [
] when recording 4K photos or recording in [Post Focus].
], [ ] or [ ] in the following cases:
Brightness measurement position
Whole screen
Center and surrounding area
Center of [+] (spot metering target)
] from the camera, the corresponding RAW and
], the gray area is displayed according to the
Normal usage
(produces balanced pictures)
Subject in center
Great difference between
brightness of subject and
background
(e.g. person in spotlight on stage,
backlighting)
Using Menu Functions
Menu list
(→213)
Conditions
DVQP1223