Burst Function - Panasonic LUMIX DC-FZ80 Owner's Manual

Burst function

■
Setting [Burst Rate]
After selecting [Burst] and pressing
and press [MENU/SET]
Speed (pictures/sec.)
Live View during burst recording
Number of
recordable pictures
*
1
The number of burst pictures is limited by the picture-taking conditions and the type and/or status
of the card used. Pictures can be taken until the card becomes full. However, the burst speed will
become slower halfway through the recording. The exact time when the slower burst speed will
start depends on the settings of the aspect ratio, picture size, and quality as well as the type of card
used.
Focusing in burst mode
Focusing varies depending on the [AFS/AFF/AFC] in [Rec] menu
Release Priority] (→193)
[AFS/AFF/AFC]
[AFS]
[AFF] / [AFC]
*
2 Focus is fixed in the first picture when dark subjects are recorded.
*
3 Since the camera records a burst of pictures while it adjusts the focus, the burst speed may be
slower.
*
4
The camera predicts the focus within a possible range by giving higher priority to the burst speed.
124
[AFS]
[AFF] / [AFC]
With RAW files
*
1
Without RAW files
in the [Custom] menu.
[Focus/Release Priority]
[FOCUS]
[RELEASE]
[FOCUS]
*
2
[RELEASE]
2
in step (→123), select the burst rate with
[H]
(High speed)
10
6
None
41
(→84)
4K Photo and Drive Settings
Selecting a Drive Mode
[M]
(Middle speed) (Low speed)
6
6
Available Available
13
80
and the setting of [Focus/
Focus
At the first picture
*
3
Normal focusing
*
Predicted focusing
,
[L]
2
2
100
4
DVQP1223