Silk'n Titan Instructions For Use Manual page 10

7. Before your first treatment
To use your Silk'n Titan, do these steps:
1. Remove the device and other components from the box.
2. Plug the adapter cable (#5 in the diagram) into the device socket and plug
the adapter into an electrical outlet. All energy level indicator lights cycle
repeatedly one aft er the other.
3. Understand how to set energy levels and become familiar with the 6
recommended treatment areas (see the rest of this section).
7.1 Energy levels
Silk' n Titan has 5 levels of energy represented by 5 indicator lights (#4 in the
diagram). The selected energy level determines the intensity of energy delivered
to your skin.
To set an energy level:
1. Press the start button (#3 in the diagram) repeatedly to move between
energies, from 1 to 5 and back to 1 again. When the desired energy is set,
the energy level indicator lights will indicate the level chosen.
2. To return to standby mode, long press the start button. All five lights will
cycle continuously.
To change to a different energy level during a treatment:
Press the start button again. This will change energy level and
allow you to treat the same or different areas with different
energy levels according to your needs.
If the energy level feels too hot or uncomfortable, try moving the
device more quickly. If the energy level is still too high, go back to
a lower level.
E
Only change energy levels when the device is not in contact with the
skin.
9
EN