Fully Utilizing The Print Quality Adjustment Feature; Preventing Soiling Of The Media And Dot Drop-Out - Roland LEF-12 Master Manual

Fully Utilizing the Print Quality Adjustment Feature

Preventing Soiling of the Media and Dot Drop-out

Procedure

Press

MENU
SUB MENU

SUB MENU
PERIODIC CL.

PERIODIC CL.
NONE 10min

W : mm L :
H : . mm
SETUP MEDIA
Description
In the following cases, ink tends to collect on the surface of the heads. Under some conditions, this ink may
be transferred to the media or cause dot drop-out.
 When you use media prone to a buildup of static charge
 When the ambient temperature is low
 When the variation in unevenness on the print surface is high (There is a limit to the unevenness of the
print surface.)
 P. 39, "Height Settings When the Print Surface is Uneven"
Selecting "PAGE" or a value from "5 to 990 minutes", the ink buildup is removed before or during printing while
printing is performed. Using "PAGE" or a value from "5 to 990 minutes results in longer printing times.
Default Settings
[PERIODIC CL.]: NONE
.
Press
the left appears.
Press
Press
the left appears.
Press
Press
Page
Automatic cleaning is performed each time prior to the start of
printing.
5 to 990 minutes
Automatic cleaning is performed when the cumulative printing time
reaches the value you set here. The color may become uneven because
the printing is paused.
NONE
Automatic cleaning is not performed.
Press
Press
mm
nal screen.
several times until the screen shown on
.
several times until the screen shown on
.
to select an item.
to enable the setting.
in this order to return to the origi-
Chapter 2 Fully Utilizing the Machine
41