Fully Utilizing The Print Quality Adjustment Feature; Preventing Soiling Of The Media And Dot Drop-Out - Roland VersaUv LEF - 12i Master Manual

Fully Utilizing the Print Quality Adjustment Feature

Preventing Soiling of the Media and Dot Drop-Out

Procedure

Press [MENU].

MENU
SUB MENU

SUBMENU
PERIODIC CL.

PERIODIC CL.
NONE 10min

Press [MENU], then [ ] to go back to the original screen.
Description
In the following cases, ink tends to collect on the surface of the print heads. Under some conditions, this ink
may be transferred to the media or cause dot drop-out.
When you use media prone to a buildup of static charge

When the ambient temperature is low

When the variation in unevenness on the print surface is high (There is a limit to the unevenness of the

print surface.)
 P. 37, "Height Settings When the Print Surface is Uneven"
Selecting "PAGE" or a value from "5 to 990 minutes," the ink buildup is removed before or during printing
while printing is performed. Using "PAGE" or a value from "5 to 990 minutes" results in longer printing times.
Default Settings
[PERIODIC CL.]: NONE
Press [ ] several times until the screen shown on the left
appears.
Press [ ].
Press [ ] several times until the screen shown on the left
appears.
Press [ ].
Press [ ] or [ ] to select an item.
Page
Automatic cleaning is performed every time before printing starts.
5 to 990 minutes
Automatic cleaning is performed when the cumulative printing time
reaches the value you set here. The color may become uneven because
the printing is paused.
NONE
Automatic cleaning is not performed.
Press [ENTER] to confirm your entry.
Chapter 2 Fully Utilizing the Machine
39