Table of Contents
Advertisement
When Dot Drop-out Cannot be Cleared Up
SET CARTRIDGE
1 2 3 4 5 6
5, 6 flashes
RENEWING INK. . .
> > > > > > > > >
MENU
INK RENEWAL
Close the ink cartridge cover and the front cover.
W :
mm L :
H :
.
SETUP MEDIA
Cleaning All Print Heads
In this operation, all inks within the printer are discharged, and the interior is cleaned. Ink is
refilled after cleaning.
This operation requires six unused SOL INK cleaning cartridges (four for cleaning and two for refilling ink).
Have these on hand before you start.
* The effect on white ink and gloss ink is the same as
. If you want to perform maintenance only on white and gloss ink, see P. 67.
Cleared Up"
Important Notes on This Procedure
All inks are discharged in this operation. Perform this operation when all procedures such
as "Normal", "Medium", "Powerful", and "Manual" cleaning, and measures to improve ink
emission flaws (such as dot drop-out) do not improve the symptoms.
P. 56, "Maintenance that Should Be Performed Daily"
P. 60, "Medium and Powerful Cleaning"
P. 62, "Manual Cleaning"
Be sure to use SOL INK cleaning cartridges. Use of any other type may result in break-
down.
When the cleaning ends, fill with ink as soon as possible. Allowing the machine to stand
without ink may damage the print heads.
Procedure
Discharge ink.
Perform operations in P. 57,
discharging ink. The following operations will discharge large amounts of fluid. Empty the drain bottle,
or the discharged fluid may overflow.
Press
MENU
SUB MENU
68
Chapter 3 Maintenance
When the screen shown on the left appears, insert an ink
cartridge in slots 5 and 6.
Press
mm
mm
nal screen.
1.
-
"Disposing of Discharged Ink" and the following procedures before
.
Press
the left appears.
Press
in this order to return to the origi-
P. 67, "When Dot Drop-out of White or Gloss Ink Cannot be
several times until the screen shown on
.
Advertisement
Table of Contents
