6C. Adjustment Of The Leg Section; 6D. Operation Of Brakes; 6E. Tilt Function - Invacare Etude Duo User Manual

Or with this type of hand control (HL 80 with integrated ACP function):

6c. Adjustment of the leg section

(see illustration 4 in the back of the users manual)
The leg section can be adjusted up/down manually by using the handle located close to the bedend.
Up: Lift the leg section.
Down: Lift the leg section all the way up and then lower it.

6d. Operation of brakes

(see illustration 6 in the back of the users manual)
Each of the bed's 4 castors is provided with brakes for both lengthwise and crosswise locking.
The brake is foot-operated.
When the bed is positioned correctly, at least one castor at the head end and one castor at
the foot end must be locked.
1) Braking: Step on the pedal.
2) Releasing the brake: Step on the release pedal.

6e. Tilt function

Both 3 - and 4 - sectioned beds can be equipped with hand controls that activate the tilt of the mattress support.
The tilt function must only be operated by medically trained persons
- otherwise, there is a risk of injury to the patient´s health.
Hand controls with tilt activating can be ordered from Invacare® - please refer to the section "Order numbers for
accessories".
Adjustment of backrest - up/down
Use the button with the symbol shown on the left
Adjustment of the thigh section - up/down
Use the button with the symbol shown on the left
Height adjustment of mattress section - up/down
Use the button with the symbol shown on the left
Key for blocking and unblocking the electrical functions
Insert the key below each button to respectively block and unblock
the hand control functions
21
2
1