Siemens 3UG4 User Manual page 43

Note
Aborting the menu switchover
The switchover process will be interrupted if the SET key
is displayed. The menu will revert to the menu command you were working with when the
switch was initiated.
Note
Reset in the event of an error
To reset the device, it is necessary to press both arrow keys
2.5 s after removal of the cause of error and with Hand-RESET active. While the keys are
pressed,
The possible settings for resetting the devices via the "Reset response" parameter can be
found in the "Operation" chapters of the relevant monitoring relays.
Note
3UG4625 residual current monitoring relays automatically return to showing the actual
measured value 30 seconds after the last limit value change.
Note
Quitting the SET menu level will trigger an internal reset in 3UG4621/3UG4622/3UG4625
and 3UG4641 device variants and restart the startup delay.
3UG4 / 3RR2 monitoring relays
Manual, 05/2016, NEB927043002000/RS-AC/004
appears on the display.
System overview
3.6 Menu-based operation
is released while or
simultaneously for more than
43