Accessories
13.2 Accessories for 3UG4 monitoring relays
13.2.5.6
Installing
Wall mounting procedure
Step
Instructions
1 / 2
Insert the fixing lugs into the designated openings
in the unit until they reach the stop.
3
Place the device against the wall surface
prepared for establishing a screw connection.
4
Insert the head screws through the
corresponding elongated holes in the fixing lugs.
5
Screw the device onto the level surface so that it
is secure.
344
Figure
Manual, 05/2016, NEB927043002000/RS-AC/004
3UG4 / 3RR2 monitoring relays