Lockdown For 24 Hours; Freedive Mode; Freedive Mode - Preparing To Dive; Setting Alarms For Maximum Depth And Maximum Time - DEEPBLU cosmiq+ Product Manual

SECTION 5 – INSTRUCTIONS FOR USE

5.3.4 Lockdown for 24 Hours

After completing a dive in Bottom Timer Mode, Scuba Mode will be locked for the next 24 hours.
The letters 'SUF' will appear on the screen when COSMIQ
functional. COSMIQ
+
calculations for 24 hours after a dive in Bottom Timer Mode. If you attempt a dive while Bottom
Timer Mode is locked, it will automatically switch to Bottom Timer Mode upon detection of
pressure. Additionally, the letters 'SUF' will appear on the screen when you access the Dive Plan
function and it will not be functional either. Bottom Timer Mode may still be used during this
period of time.

5.4 FREEDIVE MODE

Freedive Mode is designed specifically for apnea/freediving. During a dive, COSMIQ
the current depth, dive time and water temperature. You can set a Max Depth and/or Max Time
alarm.
5.4.1 Freedive Mode – Preparing to Dive
There are two ways to prepare for a dive in Freedive Mode: water activation or manual activation.
Water activation: If Freedive Mode is your default underwater mode, then simply enter in the
water when COSMIQ
Mode once you descend past 2 meters/6.5 feet.
Manual activation: If Freedive Mode is not your default underwater mode, you must activate it
manually. Navigate to Freedive Mode using the MODE button. Enter the water and begin descent
while in Freedive Mode.
NOTE: On the surface, COSMIQ
Therefore, there may be a slight delay between descending below 2 meters/6.5 feet and Freedive
Mode activating. During a dive, the sampling rate in Freedive Mode is 1 second.
When you navigate to Freedive Mode, COSMIQ
will enter Standby after 10 minutes, turning off the screen, but it will remain active in Freedive
Mode, ready to activate upon detection of pressure. After 30 minutes of inactivity in Freedive
Mode COSMIQ will revert back to Watch Mode.
+

5.4.2 Setting Alarms for Maximum Depth and Maximum Time

You can set alarms for maximum time and maximum depth in Freedive Mode. There are two ways
to set the Max Depth and Max Time in Freedive Mode:
1. Using COSMIQ
2. Using the Deepblu mobile app (see above section 4.5)
BACK TO INDEX
will not be able to perform any decompression, saturation or desaturation
is in Standby or Watch Mode. COSMIQ
+
refreshes its sensors and captures data at 15 second intervals.
+
(see below)
+
is in Scuba Mode and it will not be
+
will automatically activate Freedive
+
will stay in Freedive Mode for 30 minutes. It
+
27
measures
+