Canon G1000 series Online Manual page 38

Important
• When removing the bottle cap, avoid squeezing the sides of the ink bottle. Hold the ink bottle as
shown in the figure above. If you push the sides of the ink bottle, ink will spatter.
• Do not shake the ink bottle. Ink may spatter when opening the cap.
• Even if the ink bottle is dented, the ink contained in the bottle can still be used without problem.
7. Refill the ink tank.
Aligning the nozzle of the ink bottle with the bottle guide (H) on the printer, insert the nozzle into the
inlet (I).
Next stand the ink bottle upside down and squeeze the sides of the ink bottle to refill the ink tank.
Important
• Make sure that each color of ink tanks is filled with corresponding color of ink bottles.
• When refilling ink tanks, do not squeeze the bottle sides too hard. Ink may spatter.
• Do not fill the ink tank above the ink tank's upper limit line (J). Ink above this line may spill over,
causing malfunction or damage to the printer, and preventing the printing operation.
• Discard empty ink bottles in compliance with local laws and regulations regarding disposal of
consumables.
8. Recap the inlet with the tank cap (E) of the ink tank.
Make sure the tank cap is completely inserted.
38