Repairing Your Printer - Canon G1000 series Online Manual

Repairing Your Printer

When transporting the printer for repairing it, follow the procedure below to prepare.
Important
• When transporting the printer, make sure to avoid the followings.
• You cannot take ink out of ink tanks.
• Do not tilt the printer. Ink may leak.
• Please handle with care and ensure the box remains flat and NOT turned upside down or on its
side, as the printer may be damaged and ink in the printer may leak.
• Pack the printer in a sturdy box so that it is placed with its bottom facing down, using sufficient
protective material to ensure safe transport.
• Do not remove the cartridge. Ink may leak.
• When transporting the printer, we recommend packing the printer in a plastic bag so that ink does
not leak.
• When a shipping agent is handling transport of the printer, have its box marked "THIS SIDE UP" to
keep the printer with its bottom facing down. Mark also with "FRAGILE" or "HANDLE WITH CARE".
1. Make sure printer is turned on.
If the printer cannot be turned on, unplug it and go to step 4.
2. If an error has occurred, press printer's RESUME/CANCEL button.
After the Alarm lamp is turned off, go to step 3.
If the error is not cleared, press ON button to turn the printer off, and then unplug it. If the printer cannot
be turned off, unplug it. Go to step 4.
3. Set printer to transporting mode.
Press and hold RESUME/CANCEL button, and then release button when POWER lamp flashes 8 times.
The printer is set to transporting mode and turned off. Unplug the printer.
4. Make sure that cartridge holder has moved to far right.
If the cartridge holder is not to the right, move it to far right.
246