General Notes - Mercedes-Benz B-Class Electric Drive Operator's Manual

Features
226
Currently inactive areas can be activated by text
message.
Triggering the vehicle alarm
With this function, you can trigger the vehicle's
panic alarm via text message. An alarm sounds
and the exterior lighting flashes. Depending on
the setting, the panic alarm lasts five or ten sec-
onds. Afterwards, the alarm switches off.
Garage door opener

General notes

®
The HomeLink
in the rear-view mirror allows you to operate up
to three different door and gate systems.
Use the integrated garage door opener only on
garage doors that:
have safety stop and reverse features and
R
meet current U.S. federal safety standards
R
Once programed, the integrated garage door
opener in the rear-view mirror will assume the
function of the garage door system's remote
control. Please also read the operating instruc-
tions for the garage door system.
When programming a garage door opener, park
the vehicle outside the garage. Do not leave the
engine running while programming.
Certain garage door drives are incompatible
with the integrated garage door opener. If you
have difficulty programing the integrated garage
door opener, contact a Mercedes-Benz Service
Center.
Alternatively, you can call the following tele-
phone assistance services:
USA: Mercedes-Benz Customer Assistance
R
Center at 1-800-FOR-MERCedes
Canada: Customer Service at
R
1-800-387-0100
®
HomeLink hotline 1-800-355-3515 (free of
R
charge)
More information on HomeLink
patible products is also available online at
http://www.homelink.com.
Notes on the declaration of conformity
( page 26).
Y
USA: FCC ID: CB2HMIHL4
Canada: IC: 279B-HMIHL4
garage door opener integrated
®
and/or com-
Important safety notes
G
WARNING
When you operate or program the garage door
with the integrated garage door opener, per-
sons in the range of movement of the garage
door can become trapped or struck by the
garage door. There is a risk of injury.
When using the integrated garage door
opener, always make sure that nobody is
within the range of movement of the garage
door.
Programming
Programming the buttons
Pay attention to the "Important safety notes"
( page 226).
Y
Garage door remote control A is not included
with the integrated garage door opener.
Turn the SmartKey to position 2 in the ignition
X
lock ( page 109).
Y
Select one of buttons ; to ? to control the
X
garage door drive.
To start program mode: press and hold one
X
of buttons ; to ? on the integrated garage
door opener.
The garage door opener is now in program
mode. After a short time, indicator lamp :
lights up yellow.
Indicator lamp : lights up yellow as soon as
button ;, = or ? is stored for the first time.
If the selected button has already been pro-
gramed, indicator lamp : will only light up
yellow after ten seconds have elapsed.
Release button ;, = or ?. Indicator
X
lamp : flashes yellow.