Operating The Climate Control Systems; Indicator Lamp - Mercedes-Benz B-Class Electric Drive Operator's Manual

not be dehumidified. The windows can fog up
more quickly. Therefore, only deactivate the
"Cooling with air-dehumidification" function
briefly.
The "Cooling with air-dehumidification" function
is operational when the vehicle is ready to drive.
The air inside the vehicle is cooled and dehu-
midified according to the temperature selected.
Condensation may drip from the underside of
the vehicle when it is in cooling mode. This is
normal and not a sign that there is a malfunc-
tion.
Problems with the "Cooling with air dehumidification" function
Problem
The indicator lamp in the
¿ button flashes
three times or remains
off. The "Cooling with air
dehumidification" func-
tion cannot be switched
on.
Setting climate control to automatic
General notes
In automatic mode, the set temperature is main-
tained automatically at a constant level. The
system automatically regulates the temperature
of the dispensed air, the airflow and the air dis-
tribution.
The "Cooling with air dehumidification" function
is activated automatically in automatic mode.
Setting climate control to automatic
Turn the SmartKey to position 2 in the ignition
X
lock ( page 109).
Y
Set the desired temperature.
X
To activate: press the à button.
X
The indicator lamp in the à button lights
up. Automatic air distribution and airflow are
activated.

Operating the climate control systems

Possible causes/consequences and M M Solutions
Cooling with air dehumidification has been deactivated due to a mal-
function.
Visit a qualified specialist workshop.
X
Activating/deactivating
Press the ¿ button.
X
The indicator lamp in the ¿ button lights
up or goes out.
The indicator lamp in the button indicates that
the respective function is activated. The
"Cooling with air dehumidification" function
has a delayed switch-off feature.
To switch to manual mode:press the É
X
or Ë button.
or
Press the K or I button.
X
The indicator lamp in the à button goes
out. Automatic air distribution and airflow are
deactivated.
Setting the temperature
Different temperatures can be set for the driv-
er's and front-passenger sides. The set temper-
ature is automatically maintained at a constant
level.
Turn the SmartKey to position 2 in the ignition
X
lock ( page 109).
Y
To increase or decrease: turn control : or
X
E counter-clockwise or clockwise. Only
change the temperature setting in small
increments. Start at 72 ‡ (22 †).
101