Editing The Connected Ip Cameras And Configuring Customized Protocols - HIKVISION DS-7600NI-E1/E2 series User Manual

2.6.3 Editing the Connected IP Cameras and Configuring
Customized Protocols
After the adding of the IP cameras, the basic information of the camera lists in the page, you can configure the
basic setting of the IP cameras.
Steps:
1. Click the icon to edit the parameters; you can edit the IP address, protocol and other parameters.
Channel Port: If the connected device is an encoding device with multiple channels, you can choose the
channel to connect by selecting the channel port No. in the dropdown list.
2. Click OK to save the settings and exit the editing interface.
To edit advanced parameters:
1. Drag the horizontal scroll bar to the right side and click the
2. You can edit the network information and the password of the camera.
Network Video Recorder User Manual
Figure 2. 32 Edit the Parameters
Figure 2. 33 Network Configuration of the Camera
icon.
46