HIKVISION DS-7600NI-E1/E2 series User Manual page 58

time for screen to be shown, mute or turning on the audio, the screen number for each channel, etc.
Steps:
1. Enter the Live View Settings interface.
Menu > Configuration > Live View
The settings available in this menu include:
•
Video Output Interface: Designates the output to configure the settings for, and only VGA/ HDMI
selectable by default.
•
Live View Mode: Designates the display mode to be used for Live View.
•
Dwell Time: The time in seconds to dwell between switching of channels when enabling auto-switch in
Live View.
•
Enable Audio Output: Enables/disables audio output for the selected video output.
•
Volume: Adjust the volume of live view, playback and two-way audio for the selected output interface.
•
Event Output: Designates the output to show event video.
•
Full Screen Monitoring Dwell Time: The time in seconds to show alarm event screen.
2. Setting Cameras Order
1) Select a View mode in
2) Select the small window, and double-click on the channel number to display the channel on the
window.
If you do not want the camera to be displayed on the live view interface, click the corresponding
Network Video Recorder User Manual
Figure 3. 7 Live View-General
Figure 3. 8 Live View- Camera Order
. Up to 36-screen display is supported for 32-ch NVR.
57
TM
is