Adjusting The Brightness Of Lcd Screen; Setting The Sleep Time - Iluv i277 Instruction Manual

iLuv Stereo Audio System for Your iPod
TM
OPERATIONAL INSTRUCTIONS
Using the Alarm Function - Continued
6. To stop the alarm from coming on daily, press the ALARM 1 or ALARM 2 buttons and set to off. Both the Alarm Icon and Wake-to icon will disappear to
signify that the alarm is deactivated.
Note:
•
Set iPod to the repeat mode if you've selected Wake To iPod, and your iPod has less than one hour of songs.
•
If you have selected the Wake To iPod setting, yet no iPod is present or there is no music on the iPod at the alarm time, i277 will automatically switch
to the buzzer mode.

Adjusting the Brightness of LCD Screen

To adjust the brightness of the LCD screen, press the SNOOZE / DIMMER button during normal operation. Each press will change the brightness level of
the LCD screen.

Setting the Sleep Time

1. To enter into the sleep mode, while the i277 is off or while listening to your iPod or the radio, press the SLEEP button. The unit will automatically turn off
after the selected time. The sleep mode also has a feature called the "Gentle Sleep", which features volume that decreases gradually.
2. To adjust the sleep time, press the SLEEP button again and choose from 15 to 120 minutes. Pressing the SLEEP button while the sleep function is set
to 15 minutes will turn off the unit.
3. To view the sleep time, wait until the display changes back to the real time, and then press the SLEEP button once. It will show the sleep time
remaining. Pressing it again will change the sleep time to the next lowest increment.
4. To stop listening at any time, press the POWER button or the POWER ON/OFF button on the Remote Control.
Note: i277 has the independent volume settings for the sleep mode without affecting the alarm volume. The sleep volume will remain at that level until the
setting is changed.
- 15 -
V11M10_IM_EN_11012006
www.i-Luv.com